Cryptographic Security Platform 1.5 - Vault 10.6.1 installation and administration [PDF][Releases]

Important: You can only configure both the Luna Cloud HSM and the Luna HSM if you are forming an HA Group to allow for High Availability. For more information, see Configuring a Luna HSM HA Group.

When you connect a Cryptographic Security Platform Vault cluster to a hardware security module (HSM), you can create one certificate for the Cryptographic Security Platform Vault cluster that you can use for all Cryptographic Security Platform Vault nodes or you can have an individual certificate for each node in the Cryptographic Security Platform Vault cluster. If you have a Luna HSM server with the ipcheck feature enabled, you must use unique node certificates.

The following procedure describes how to configure Cryptographic Security Platform Vault as an HSM client that uses unique certificates for each node in the cluster. If you want to use a single certificate that will be shared by all nodes in the cluster, see Configuring CSP Vault as a Luna HSM Client with a Single Cluster Certificate.

Before You Begin

For the HSM server that you want to connect to Cryptographic Security Platform Vault, make sure you have the following information available:

The HSM server name.
The user name and password for an HSM account with Admin privileges.
The HSM partition name and password.

You will also need:

A Cryptographic Security Platform Vault account with Security Admin privileges.
Access to the HSM server via a shell account. The following procedure uses scp and ssh to connect to the server.

The following instructions are specific to the Luna HSM.

Procedure

Download the HSM server certificate file server.pem from the HSM server to which you want to connect. We recommend that you rename the server.pem certificate file so that you can find the certificate file easily when you need to upload it to Cryptographic Security Platform Vault later in this procedure.
For example, if your HSM server is hsm1.my-company.com, you could enter:
```
# scp admin@hsm1.my-company.com:server.pem ./hsm1cert.pem
admin@hsm1.my-company.com's password: 

server.pem             100% 1155     1.1KB/s   00:00 
```
Log into the Cryptographic Security Platform Vault Management webGUI using an account with Security Admin privileges.
In the top right, click the Switch to Appliance Management link.
In the top menu bar, click Settings.
In the System Settings section, click HSM Server Settings.
On the HSM Server Settings page, select Thales Luna HSM from the Type drop-down list and click Configure.

On theLuna HSM Server Settings page, select the Luna HSM tab and then specify the options you want to use for the HSM server.

Field	Description
State	Make sure this field is set to Enabled.
Hostname	Enter the hostname for the HSM server.
Partition Label or HA Group Name	Enter the partition label for the partition on the HSM server that Cryptographic Security Platform Vault will be using. Note: Make sure you enter the partition label and not the partition name in this field.
Partition or Crypto Officer (CO) Password	Enter the password for the Cryptographic Security Platform Vault partition or the Crypto Officer (CO) password for Luna HSM modules version 7 and above.
Server Certificate	Click Browse and open the appropriate HSM server certificate file.
Client Certificate Mode	Select the Individual Node Certificates radio button so that Cryptographic Security Platform Vault will use a unique certificate for each node in the cluster.
Admin Key ID	Indicates whether an Admin Key already exists on the HSM.

Click Apply, then click Proceed at the prompt. Do not test the connection yet.
Navigate to the Client List tab. You should see one entry for each Cryptographic Security Platform Vault node in the cluster.
Select the first node in the list, then select Actions > Generate Client Certificate for node-name.domain-name. Cryptographic Security Platform Vault automatically generates a unique certificate for that node called node-name.domain-name.pem and downloads it to your browser's default download location.
For example, if the name of the node is KC-1 and it is running on the domain my-company.com, the certificate file would be called KC-1.my-company.com.pem.
Repeat the previous step for each Cryptographic Security Platform Vault node in the cluster.

Upload all certificates to the root directory on the HSM server. For example, if you have two Cryptographic Security Platform Vault nodes, you would copy both Cryptographic Security Platform Vault node certificates to HSM server:

# scp KC-1.my-company.com.pem admin@hsm1.my-company.com:
admin@hsm1.my-company.com's password: 

KC-1.my-company.com.pem             100% 1164     1.1KB/s   00:00 

# scp KC-2.my-company.com.pem admin@hsm1.my-company.com:
admin@hsm1.my-company.com's password: 

KC-2.my-company.com.pem             100% 1164     1.1KB/s   00:00

Using a shell account, log into the HSM server and:
1. Register the new Cryptographic Security Platform Vault client using "node-name.domain-name" for both the client name and hostname. The double quotes are required because of the period in the client name.
  Tip: If the registration fails because a client of that name already exists, you need to delete the existing client. You cannot change the name of the client pem file that CSP Vault generates.
2. Assign any partitions that you intent to use to the Cryptographic Security Platform Vault client.
  Note: This should include the partition that you specified above as well as any other partitions that you intent to use from CSP Vaults.
For example, if you want the Cryptographic Security Platform Vault client to be assigned to KC_partition1 on hsm1.my-company.com, you could enter:
```
# ssh admin@hsm1.my-company.com
admin@hsm1.my-company.com's password:

[hsm1] lunash:>client register -client "KC-1.my-company.com" -hostname "KC-1.my-company.com"
'client register' successful
Command Result : 0 (Success)
[hsm1] lunash:>client register -client "KC-2.my-company.com" -hostname "KC-2.my-company.com"
'client register' successful
Command Result : 0 (Success)
[hsm1] lunash:>client assignPartition -client "KC-1.my-company.com" -partition KC_partition1
'client assignPartition' successful
Command Result : 0 (Success)
[hsm1] lunash:>client assignPartition -client "KC-2.my-company.com" -partition KC_partition1
'client assignPartition' successful
Command Result : 0 (Success)
[hsm1] lunash:>exit
```
Return to the LunaHSM Server Settings page and click Test. You should see a message that says the HSM connection is OK and that the Admin Key needs to be regenerated.
To regenerate the Admin key, go to Settings > General Settings > Admin Key Parts, then click Generate New Key. You should get a message that the Admin Key was successfully generated and distributed. To verify this, go back to Settings > System Settings > HSM Server Settings. The Admin Key ID field should display a GUID for the new Admin Key.